PARTS
A | Upright bottom × 2
B | Upright top × 2
C | Base side × 2
D | Base back × 1
E | Triangle plates × 4
F | Angled support bar × 2
G | Horizontal bars × 2
H | Overhead support plate × 2
I | Monkey bars × 2
J | M8 × 45mm screws × 10
K | M8 × 50mm screws × 22
L | M8 × 16mm screws × 8
1. CONNECT THE UPRIGHTS
Connect Upright bottom (A) to Upright top (B) using M8 × 45mm screws.
2. CONNECT THE BASE SIDES
Connect the Base sides (C) via the Base back (D) using M8 × 50mm screws.
3. ATTACH THE TRIANGLE PLATES
Attach Triangle plates (E) to either side of the Base side (C) using M8 × 50mm screws.
4. INSTALL THE UPRIGHTS
Insert assembled upright into the Triangle plates (E) using M8 × 50mm screws.
5. CONNECT THE ANGLED SUPPORTS
Connect Angled support bar (F) to Side base (C) and assembled upright using M8 × 45mm screws.
6. INSTALL THE HORIZONTAL BARS
Install Horizontal bars (G) between assembled uprights using M8 × 50mm screws.
7. ASSEMBLE THE MONKEY BARS
Attach Monkey bars (I) to the Overhead support plates (H) using M8 × 16mm screws.
8. ATTACH THE MONKEY BARS
Attach assembled monkey bars to the top of the upright using M8 × 50mm screws.
