1. CONNECT THE UPRIGHTS
Connect Upright bottom (A) to Upright top (B) using M8 × 45mm screws.
2. ATTACH THE PLATES AND SUPPORTS
Attach the Triangle plates (E) to Side base (C) using M8 × 50mm screws. Attach Angled support bar (D) to Side base (C) using M8 × 45mm screws.
3. CONNECT THE BASES
Attach the assembled Side bases (C) using the Back base (F) with M8 × 50mm screws.
4. ATTACH THE UPRIGHTS
Attach the assembled upright to the Triangle plate (E) using M8 × 50mm screws. Attach the Angled support bar (D) to the upright using M8 × 45mm screws.
5. INSTALL THE SLIDER BAR
Slide the Slider bar (G) down the uprights.
6. TIGHTEN ALL SCREWS
Fully tighten all screws.
